线阵列音响

覆盖角度为100°水平×15°垂直的高频号角上的三个34mm钕铁硼高频驱动器组成。其内部部件备有与高频保护电路在一起的无源分频器，高频保护电路可防止高音驱动器过载损坏。在*性安装时，可吊装或者支撑方式能适用不同的多种环境。

尺寸
Dimensions(H×L×D)
349×597×381(mm)
SPECIFICATIONS
Power Rating 1750 Watts Peak
875 Watts Continuous
Frequency Range 57 Hz - 20 kHz
(-10 dB)
Dimensions
(H x W x D) 349 mm x 597 mm x 444 mm
(13.75 in x 23.5 in x 17.5 in)
Frequency Response 75 Hz - 20 kHz
(+/-3db)
Maximum Peak Output 136 dB SPL at 1m
Coverage Pattern 100 x 15 nominal
DPC-2 Output as (Continuous IED shaped pink noise into rated load impedance) LF: 750 Watts, HF: 125 Watts
DPC-2 Output Section LF: Dual-Bridged Technology™, Class D
Audio Input Connector XLR with loop through
LF Driver 1 x JBL 2262FF 305 mm (12 in) neodymium magnet
HF Driver 3 x JBL 2408J, 38 mm (1.5 in)
User Controls Input Attenuator (0-16 dB)
Signal Processings DSP based, resident in Input Module
AC Power Operating Range 90-132 VAC or 216-264 VAC, 50/60 Hz
AC Input Connector Neutrik PowerCon (NAC 3MPA)
AC Loop Through Connector Neutrik PowerCon (NAC 3MPB)
AC Current Requirements 6A per system at 120V, 3A per system at 240V
Enclosure 25/15 mm, 11-ply birch plywood
Suspension / Mounting Optional VRX-AF line array frame kit, 10mm forged eyebolts or internal dual angle 36mm pole mount cup for pole or tripod mounting
Finish Black DuraFlex™ finish
Grille Powder coated, black, 16-gauge perforated steel with with acoustically transparent foam
Net Weight 24 kg (52 lb)
Optional Accessories VRX-AF: Suspension array frame
低音单元
LF unit
12-in ×2
性能特点:
VRX932LA音箱有着真实自然的表现，其较大的特点就是体积小、重量轻、投射距离远、灵敏度高、穿透力强、声压级高、语音清晰、可靠性强、区域间声音覆盖均匀等特点。持久耐用的外表，使用了高密度夹板作为箱体的结构材料，而箱体表面采用了耐久度高的黑色金刚砂漆。这样的音箱的抗老化强度方面非常强，能长期经受日晒雨淋，而安装在户内更是能防止潮湿等恶劣的环境。
高音驱动
HF driver
36mm×3
净重
Net weight
23kg
承受功率
power handling
600W

灵敏度
Sensitivity(1W/1M)
114dB
应用场合:
运用于剧院、体育场馆、户外演出、夜总会、室内SHOW吧、大舞台、酒吧、多功能厅、及固定安装系统等场所使用；与VRX918S线阵音箱组合使用效果更佳，不仅声音质量高，而且便于安装。